The Bendix+ DV'2 automatic reservoir drain valve ejects moisture and contaminants from the reservoir in which it is connected It operates automatically and requires no manual assistance or control lines from other sources The automatic reservoir drain valve has a die cast aluminum body and cover, and is normally mounted either in the bottom of the reservoir-using the top port of the drain valve, or in the end of an end drain reservoir-using the side port of the valve The DV'2 drain valve is also available with a heater and thermostat cast into the cover for vehicles operated in subfreezing temperatures The heated DV'2 valve is supplied in either a 12 or 24 volt model and in a bottom or end drain configuration A 1-4- male pipe adapter is supplied with all DV'2 drain valves, end drain and bottom drain, both standard and heated This adapter should be installed directly into the reservoir Early versions included a filter screen in the adapter The filter should be discarded Later versions may have a standard pipe nipple instead of the adapter NOTE: If a vehicle equipped with a Bendix+ DV'2 automatic drain valve-s- is operated in subfreezing temperatures, it is recommended that a heated reservoir drain valve be installed